Differential surface modification mechanism of chalcopyrite and pyrite by Thiobacillus ferrooxidans and its response to bioflotation.

Mineral processing encounters the challenge of separating chalcopyrite and pyrite, with the conventional high alkali process characterized by issues such as large dosages of reagents, complex procedures, and environmental pollution. This study addresses this challenge by isolating and enriching Thiobacillus ferrooxidans (T·f) from acidic mine drainage, employing it as a biosurfactant. The modification mechanism of T·f was thoroughly analyzed. Fe dissolution through biological oxidation formed a passivation layer (jarosite [KFe3(SO4)2(OH)6], elemental sulfur (S0), and metal sulfides (Cu/Fe-S) on the surface of minerals. Metal oxides, hydroxides, and sulfates were detected on the surface of two minerals, but the difference was that elemental sulfur (S0) and copper sulfide (Cu-S) were detected on the surface of chalcopyrite. elucidating the fundamental reason for the significant difference in surface hydrophobicity between chalcopyrite and pyrite. T·f has been successfully used as a biosurfactant to achieve copper-sulfur separation.

Innovative methodology for comprehensive utilization of arsenic-bearing neutralization sludge.

Arsenic-bearing neutralization (ABN) sludge is a classical hazardous waste commonly found in nonferrous metallurgy. However, the current storage of these hazardous wastes not only has to pay costly hazardous waste taxes but also poses significant risks to both the environment and human health. To address these issues and achieve the comprehensive utilization and minimization of ABN sludge, this study proposes a new combined process. The process involves selective reduction roasting, leaching, and carbonation, through which, the arsenate and gypsum in the ABN sludge were recovered in the form of As(s), high-purity CaCO3, and H2S. The selective reduction behaviors of arsenate and gypsum were investigated through thermodynamic analysis and roasting experiments. The results indicated that the 95.35 % arsenate and 96.55 % gypsum in the sludge were selectively reduced to As4(g) and CaS at 950 °C by carbothermic reduction. The As4(g) was condensed to As(s) and enriched in the dust (As, 96.78 wt %). In the leaching process, H2S gas was adopted to promote the leaching of CaS, and resulted in 97.41 % of CaS in the roasted product was selectively leached in the form of Ca(HS)2, leading to a 74.11 % reduction in the weight of the ABN sludge. Then, the Ca(HS)2 was subjected to capture CO2 for the separation of Ca2+ and S2-. The result depicted that 99.69 % of Ca2+ and 99.12 % of S2- were separated as high-purity (99.12 wt %) CaCO3 and H2S (24.89 vol %) by controlling the terminal carbonation pH to below 6.55. The generated H2S can be economically converted to sulfur by the Clause process. The whole process realized the comprehensive resource recovery and the minimization of the sludge, which provides an alternative solution for the clean treatment of hazardous ABN waste.

Ammonium-Amine Co-Activation: Promoting the Sulfurization of Azurite and Its Effect on Xanthate Adsorption.

Enhanced sulfurization has always been the focus of research on the flotation of copper oxide minerals. In this study, combined ammonium-amine salts were innovatively applied to improve the sulfurization of azurite. Flotation tests were carried out to evaluate the promoting effect of ammonium-amine co-activation on the sulfurization-xanthate flotation of azurite, and the microstructure evolution of sulfurized products was investigated to reveal the mechanism underlying this promoting effect. Compared with single ammonium (amine) salt activation, ammonium-amine co-activation improved the floatability of azurite to a greater extent, i.e., the flotation recovery increased by over 4 percentage points. ToF-SIMS, ICP-OES, FESEM-EDS, AFM, XRD, and UV-vis analyses indicated that ammonium-amine co-activation combined the advantages of inorganic ammonium for buffering pH and organic amine for copper ion complexation, thus promoting the growth of sulfurized crystal products (covellite) and enhancing the adhesion stability of sulfurized products on azurite. Therefore, increasing amounts of copper sulfide components were generated under the ammonium-amine-Na2S system, promoting the adsorption of additional xanthate on azurite. This study provides theoretical support for the application of combined ammonium-amine salts for the sulfurization flotation of copper oxide.

Treatment of stellate ganglion block in diseases: Its role and application prospect.

The stellate ganglion (SG), as a type of sympathetic ganglion, consists of the sixth and seventh cervical vertebrae and the first thoracic sympathetic ganglia. SG block (SGB) is a minimally invasive injection that aims to inject low-concentration local anesthetics to induce a broad sympathetic blocking effect near the SG. There have been no changes and progress in the clinical application of SGB since the 1830s due to several potential risks, including hematoma from blood vessel injury, hoarseness from recurrent laryngeal nerve injury, and cardiopulmonary arrest. The feasibility and safety of SGB have greatly improved since the appearance of ultrasound-guided SGB. In recent years, SGB has been widely applied in the field of non-anesthesiology sedation, with significant therapeutic effects on pain, immunological diseases, somnipathy, psychological disorders, arrhythmias, and endocrine diseases. The present study reviews the present application of SGB in clinical practice.

Simultaneous stabilization/solidification of arsenic in acidic wastewater and tin mine tailings with synthetic multiple solid waste base geopolymer.

Stabilization/Solidification (S/S) is considered as a feasible technology for the treatment of arsenic (As) in acidic wastewater (AW) and tin mine tailings (TMTs); however, high cost, high carbon footprint, and strict reaction conditions are the main limitations. Herein, a novel alkali-activated geopolymer material (AAGM) for S/S As was synthesized by combining AW, TMT, gypsum (GP), and metakaolin (MK). At room temperature, an initial As concentration of 3914 mg/L, a NaOH content of 4.98%, and an MK content of 20% decreased the As leaching concentration to 1.55 mg/L (<5 mg/L). The main S/S mechanisms of As included physical encapsulation of C-(A)-S-H and geopolymer structures, ion exchange of ettringite, and formation of Fe-As and Ca-As precipitates. Further studies showed that increasing initial As concentration and MK content facilitated the formation of Ca-As precipitates and C-(A)-S-H gels. The semi-dynamic leaching tests revealed that the leaching mechanism of As was surface wash-off. The effective diffusion coefficients of the samples were less than 10-13 cm2/s, and the respective leachability indexes were greater than 9, indicating that AAGM was effective in preventing the leaching of As. Therefore, this study provides a green and low cost solution for the synergistic utilization of AW, TMT, GP, and MK.

Red mud-metakaolin based cementitious material for remediation of arsenic pollution: Stabilization mechanism and leaching behavior of arsenic in lollingite.

The proper treatment of lollingite is of great significance due to its rapid oxidation leading to release of arsenic into the environment. Herein, a green multi-solid waste geopolymer, consisting of red mud, metakaolin, blast furnace slag, and flue gas desulfurization gypsum, was developed. The obtained red mud-metakaolin-based (RMM) geopolymer demonstrated good arsenic retention capability. The results showed that the replacement of SO42- in ettringite with AsO42- via ion exchange, formation of Ca-As and Fe-As precipitates, and physical encapsulation with aluminosilicate gel were the main mechanisms that prevented the release of arsenic. Further dissolution of ettringite in RMM was alleviated by adding a suitable amount of Ca(OH)2 and controlling the pH of the leachate. TCLP results verified that RMM materials possessed an outstanding ability to stabilize arsenic, with a leaching rate below the permitted value of 5 mg/L for safe disposal. The low leachability of the RMM geopolymers (<0.50 mg/L) is potentially related to the pH buffering capacity of the hydration products at a pH range of 2-5. RMM geopolymers showed a high compressive strength (>15 MPa) and low arsenic leaching concentration (<2.66 mg/L) after 28 days of curing. These results demonstrate the potential of RMM geopolymers to be utilized as an environmentally friendly backfilling cementitious material for sustainable remediation of arsenic pollution.

Signet ring cell carcinoma arising from sacrococcygeal teratoma: a case report and review of the literature.

We report here a rare case of adult sacrococcygeal teratoma (SCT) that was pathologically diagnosed as signet ring cell carcinoma (SRCC). A 26-year-old man complained of lower abdominal distension and discomfort and difficulty in urinating, and he was admitted to our hospital. Pelvic magnetic resonance imaging showed multiple oval, solid-cystic masses around the anterior sacrococcygeal region that measured approximately 96 × 114 × 89 mm. Magnetic resonance imaging also showed irregular cysts around the posterior sacrococcygeal region that measured approximately 34 × 72 × 60 mm. The preliminary diagnosis was cystic SCT. The patient then underwent surgery, during which we incised the cysts. A large amount of viscous, jelly-like liquid was present in the anterior sacrococcygeal mass. Furthermore, a large amount of light yellow, porridge-like secretion was present in the posterior sacrococcygeal mass. A pathological examination and immunohistochemistry confirmed teratoma, specifically SRCC.